Chud has provided air conditioning, heating, water heater, air quality and duct cleaning services to the residents of Warminster, PA and the surrounding areas since 1970! We’re committed to providing first class air conditioning service to all of our clients.
We’re the AC experts. But don’t take our word for it. Check out our reviews and find out why your neighbors consider us to be their nearby Warminster, PA heating and air company that specializes in air quality and duct cleaning.
Local Reviews
for Warminster, PA
Our Reviews by City
Quality friendly service
William - Warminster, PA 18974
Severely clogged heater vent. Very good experience, on time and completed quickly
Response from Chud Air Conditioning & Heating:
Your 5 star review means a lot to us William! Thank you.
Intermitten Heater No Start
Tony - Warminster, PA 18974
Excellent service, professional, well trained and very friendly. I'm a repeat customer because of exceptional service and outstanding technicians.
Response from Chud Air Conditioning & Heating:
Hi Anthony! We’re so grateful for your 5-star review. We strive to offer the best experience possible, and your review tells us that we’re on the right path.
Shane was professional, efficient and thorough!
Rick - Warminster, PA 18974
Very professional!
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Rick, everyone at Chud appreciates it!
Very comprehensive and explained all aspects of service call. Fp.
Frank - Warminster, PA 18974
Response from Chud Air Conditioning & Heating:
Frank & Joyce, thank you for the 5 star review, we are grateful that you chose Chud.
Customer
Philip - Warminster, PA 18974
Professional technician, friendly and efficient
Response from Chud Air Conditioning & Heating:
5 stars, thank you Phillip & Laura.
Reliable
William - Warminster, PA 18974
Response from Chud Air Conditioning & Heating:
William & Mildred, thank you for leaving Chud a 5 star review!
Great service wonderful installers
Robert Wiegand - Warminster, PA 18974
Both of the installers were great. They were both very polite and did a great job
Response from Chud Air Conditioning & Heating:
Robert, we’ll make sure to pass your kind words along to John & Matt, who we know will be delighted to read your comments.
Wonderful
Robert - Warminster, PA 18974
Keith was right on time. He and his partner were very courteous and friendly
Response from Chud Air Conditioning & Heating:
5 stars, thank you Robert!
Retired chemist.
David McComsey - Warminster, PA 18974
Paul did a great job on both the heating system and the mini-split.
Response from Chud Air Conditioning & Heating:
David & Mary, thank you for the 5 star review, we are grateful that you chose Chud.
Great
Maryann - Warminster, PA 18974
Keith was super friendly and the dryer vent problem is fixed and thank you !
Response from Chud Air Conditioning & Heating:
Maryann, I'm so glad we could help! Thank you for leaving Chud a 5 star review.
Great Service
Tara - Warminster, PA 18974
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Tara. It truly means a lot to the Chud team!
Great service
Rachel - Warminster, PA 18974
Response from Chud Air Conditioning & Heating:
5 stars, thank you Rachel!
Great honest service
Rachel - Warminster, PA 18974
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Rachel. It truly means a lot to the Chud team!
The best service ever
Irene - Warminster, PA 18974
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Irene.
Great service
Susan - Warminster, PA 18974
We had our vents and duct work cleaned. The employees were very friendly and extremely polite. They worked in a professional manner. I am very happy with the results.
Response from Chud Air Conditioning & Heating:
Susan, thank you for the 5 star review, we are grateful that you chose Chud!
1 Year Free checkup service
Anthony - Warminster, PA 18974
Prompt, Friendly and Courteous Service from Sebastian Riveria. Very happy with the well trained service we received. Highly satisfied with the install and service from Chud.
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Anthony, the Chud team appreciates it.
He was great and very personable.
Robert - Warminster, PA 18974
He was great, right on time. He was very considerate of our home. He was very personable. I feel he is an asset to your organizatio
Response from Chud Air Conditioning & Heating:
Thank you for the wonderful review and for taking the time to share your feedback.
Great Service
Lauren - Warminster, PA 18974
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Lauren.
Timely, courteous, and competant
Larry - Warminster, PA 18974
Response from Chud Air Conditioning & Heating:
Larry, thank you for the kind words and 5 star review! The Chud team appreciates it.
wonderful service. talented provider
Frank - Warminster, PA 18974
excellent service visit.
Response from Chud Air Conditioning & Heating:
Frank & Joyce, thank you for the 5 star review! The Chud team appreciates it.
Great people Great equipment
Joel - Warminster, PA 18974
The guys were very professional did a good job of cleaning the dryer vent that goes out over the garage roof. I would give them 5 stars but but the top vent flap, but, I paid a roofer to make those vent flaps over the garage roof open & close completely and they were doing that, but since the guys took it off the clean the vent out, and then put it back, top flap isn’t closing all the way.
Response from Chud Air Conditioning & Heating:
Joel, thank you for your feedback. Your experience is important to us and we would appreciate hearing more about it. Feel free to contact us at 215-659-4343. Thanks again!
Great service! Awesome employees!
Michelle - Warminster, PA 18974
You couldn’t ask for better! The guys were very informative about the whole process.
Response from Chud Air Conditioning & Heating:
Michelle, thank you for the 5 star review!
Friendly and Informative
Andrew - Warminster, PA 18974
Chudd and the employees they sent out were polite, friendly and informative about my heating system. Would definitely recommend and will certainly use again.
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Andrew.
Keith diagnosed the issue as a part failure so the machine did not need vacuuming lint
Estelle - Warminster, PA 18974
Honest estimation relating to the problem.
Response from Chud Air Conditioning & Heating:
5 stars, thank you Estelle!
Hot water heater replaced
David - Warminster, PA 18974
Paul was very capable and didn't waste any time doing the job we asked for. After the job was complete he explained what had been done and how we could manage the system ourselves. We were very satisfied with the whole experience and would recommend Chud and Paul to anyone who asked.
Response from Chud Air Conditioning & Heating:
David & Mary thank you for the kind words and 5 star review. The Chud team appreciates it!
Paul A.
Not doing anything right now
Paul A.
Surveyed the home and put together several options in addition to the 3 bedroom duct cleaning quote. Verbally discussed options with homeowner over the phone. I email the quotes per homeowner request. Homeowner was at work and will review the estimates again over the weekend. N/C, free estimate.
Keith R.
Performed a first floor dryer vent cleaning. Dryer vent, duct, flex duct and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time and exhaust flow is optimal. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Shane A.
Customer said unit was puttering. Unit was working fine when i arrived. Charged for a maintenance it seems that the flame sensor was the cause of the problem. Cleaned the flame sensor did a combustion test co was 32. Customer changed filter. Did a amp check on the blower motor and inducer motor both are running in range. Customer did not want to change flame sensor. System is tested and operating properly at this time. Model # 393AAV042091AAJA Serial # 393AAV042091
Keith R.
Performed a first floor dryer vent cleaning and reopened a sizable clog. Dryer vent, duct flex hose and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time. Recommend dryer vent cleaning every 1-2 years. Thank you for your business! The dryer vent flaps are fragile due to prolonged heat exposure and one of the fins broke. Customer is aware of the situation
Paul T.
Came out today for a intermittent issue with a Winchester furnace model #Pcuhbld12n100A, serial #Ehfm294255. Upon arrival the homeowner stated that the system intermittently stops working. The homeowner would then come down to the system and reset the switch and the system would start. When I arrived the system was set for 69° and it was 69° in the home. I raised the temperature up by 6° and observed the system starting. The system started without any issues. I cycled the system on and off a several times to try and recreate the issue but was unsuccessful. I explained to the homeowner that the system has a red led light on the control board. When the system fails it will give a blink code to help us narrow down the issue. By resetting the switch it erases the blink code till it fails again. The inducer motor amp draw is .87 and the blower motor amp draw is 5.2. The pressure switch is not clogged and in good condition. Combustion analysis is normal and the filter is clean. Unless the sy
Frank B.
Performed preventative maintenance for high efficiency furnace. Cleaned the burners, flame sensor and burner compartment. Inspected all the electrical components. Confirmed proper high and low voltages. Tested the amp draw for the blower motor and inducer. Both are operating properly within the manufacturer specs. Drained the drain trap of any and all debris. Scoped the heat exchanger it inspect for cracks or rust. Normal wear was present but no damage at this time. Performed a combustion analysis on the furnace. System is operating at 92.5% efficiency with a CO level of 24ppm. Performed humidifier service on a power vent humidifier. Cleaned the housing and replaced the water panel. System is operating properly at this time. Manufacturer Lennox Model #G6IMPV-60C-091 Serial #5910M12225
Keith R.
Performed air duct cleaning and sanitation on a 4 bedroom single system house. All vents and ductwork are clear of dust and debris at this time. System is functioning properly at this time. Recommend duct cleaning every 3-4 years. Thank you for your business! Customer is calling the office to pay by phone.
Christian C.
Performed preventative maintenance on a Lennox heat pump. Upon arrival I watched the system cycle on in heat. I observed the system shut down normally once it reached the desired temperature. Checked all electrical to ensure connections are good. Blower motor amps are in good range. Evaporator Coil is clean. Replaced filter that the homeowner supplied size 12x20x1. Checked heat pack for normal operation. Changed thermostat setting back to homeowners preference. System is operating properly at this time. Condenser model# 14HPX-018-230A20 Condenser serial#1916C10510 Air handler model# CBX25UHV-018-230 Air handler serial# 6016E44931
Frank B.
returned to replace a pressure switch and flame sensor. Chud will have a gas valve and a furnace control board on hand so that we are properly prepared in case further diagnostic. Tested the system upon completion. System is operating properly at this time. This repair is covered under warranty. Chud has a record of maintenance. Return any warranty parts to 1570 office after repair. N/C, WARRANTY. Lennox M#EL180DF070E36B-02, S#5917H03356.
Jonathan C.
Inspected failed water heater and discovered internal tank is rusted out and leaking on floor. Brown water is also coming from sinks. Water heater is 50 gallon electric and will need to be replaced. Quoted $1,730.00 . Customer passed on replacement.
Shane A.
Showed up to a no heat Call. Error code 5 showed up failure to ignite. System is under warranty per Paul Ash we will need to order gas valve, pressure switch, new flame sensor. S#5917H03356 m#EL180DF070E36B-02
Shane A.
Want to A no heat call. Arrive to the house in the heater was working turn system all cleared out and do support change to customer supplied filter clean the flame sensor. Went through the thermostat to make sure it was programmed right. I did not collect payment due to we were out for a maintenance this month and we were also here the other week and replace the thermostat in the same issue is occurring but while I was there the furnace was operating properly. m#EL180DF070E36B-02 s#5917H03356
Paul A.
On arrival found the system start and observed the outdoor fan motor spinning at a very slow rate. Checked capacitor reading and found that it was well below rated 40/5 MFD. Disconnected low voltage and observed contactor “sticking” as well. Advised homeowner that these parts needed to be changed first to move forward with the preventative maintenance. After repairs, observed condenser fan motor drawing 0.6 amps which is above nameplate (0.5 FLA). Compressor amperage 6.9, rated (14.1 RLA). The indoor unit blower wheel has a slight rattle to it. Pulled blower assembly to inspect for any defects. The wheel is likely off balance slightly which is to be expected on a 2013 heat pump system. Homeowner replaced the 16x20x1 air filter. All(3) banks of the electric heat pack are functional and reading 19.8 amps per bank. Overall, given the parts that could fail Chud will provide a quote to address the outdoor fan motor and fan blade. We can also provide a FREE estimate to upgrade the system a
Paul A.
Did a no heat call on a Lenox gas furnace. Arriving to the job I heard the inducer motor humming. So I undid the flue pipe and made sure the inducer motor was Spinning freely which it was not due to dust and debris in there. After cleaning that out and making sure the inducer motor was spinning freely the unit started right up and is working properly at this point. M#SL280UH090XV48B-05 s#1718H53931
Frank B.
Performed preventative maintenance for a 3 zone boiler system. Inspected all the electrical components. Confirmed proper high and low voltages. Boiler is a New Yorker model from 2011. Includes, 3 zone panel with 3 circulators, auto fill and newer expansion tank. Systems water pressure was at 20psi on arrival. Found no air in the 3rd floor radiators. Found a couple radiator valves in the off position to which I turned them on for even heat. House had an addition put on from previous owners in the back of the house. This is where baseboards were added. The majority of the house ran by the dining room thermostat. Cleaned the burners and burner compartment. Performed a combustion analysis on the boiler. System is operating at 81.4% efficiency with a CO level of 24ppm. Customer would like to updated the thermostats to be programmable. Attached will be the pricing that customer requested. Thermostats have to operate on batteries since the current ones only have control voltage without a comm
Paul T.
Came out today for a no heat call. Upon arrival the homeowner stated that the system runs on a schedule but this morning it was under the desired temperature and the thermostat said recovery mode. I powered the system up and called for heat I observed the system starting normally and once it reached the desired temperature the system shut down. I explained to the homeowner that based on the information she is giving me and from what I’m seeing it is my opinion that either the batteries in the thermostat are bad of the thermostat is defective. After giving it some thought the homeowner opted to replace the thermostat. I replaced the old thermostat with a new Honeywell t4 thermostat serial #2213jjb48078. After the installation I tested the system by calling for heat and ac. The system is operating properly at this time.
Paul A.
Did a preventative maintenance on a old gas furnace. System is older and will need to be replaced soon. During the maintenance I cleaned out the burner box inspected the igniter. Also cleaned out the burner box and switched out the 16 x 25 x 1 filter. Also did a combustion test the CO level was for the O2 level was 16.2. I also added out the blower motor and the inducer motor works we’re both on the higher side but range of the furnace. Checked all other electrical connections to make sure they were tight Secure. Also recommending a new water heater because the other one is from 1996 and needs to re-replaced immediately. System is operating properly at this point. M#H8MPN100F14A1 s#A034103657
Paul A.
Did they maintenance on a high-efficiency gas furnace. During the maintenance I did a combustion test the CO level was nine and the O2 level was 19.2. I also clean the flame sensor and cleaned out the burner rack. Also cleaned out the blower motor housing. Also did an amp draw on the inducer motor and the blower motor which are both running within furnace specs. Also I poured water down the high efficiency furnace drain to make sure that the trap was not clogged and that it was draining properly. Also did a humidifier service where I wipe down the whole entire humidifier changed out the number 35 panel and also made sure it was draining properly which it was. Filter size 16 x 25 x 1. System is operating properly at this point. M#58MCB100-16 s#58MCB100—-11116.
Paul A.
Did a preventative maintenance on a train gas furnace. Clean the flame sensor. Did an amperage draw on the inducer motor and the blower motor the inducer motor was a little high for my liking but was in the range of the furnace specs. Cleaned out the burner compartment and the blower housing. Did a combustion test the CO was seven and the O2 was 14. Cleaned out the drain for the high-efficiency furnace and made sure the condensate pump was working.M#TUX1B080A9421AB s#7165SH67G
Paul A.
Did a preventative maintenance on a Lennox gas furnace. During the maintenance I clean the flame sensor. Also, I cleaned out the burner box and the blower motor housing. I also did an amperage check on the inducer motor and the blower motor which both need the furnace specs. I also cleaned out the inducer port. I also shop vac to return out due to a lot of contractor dust due to this I’m gonna recommend a duct cleaning. Also did a carbon monoxide check the CO level was 49.4 and the O2 level was 11.2. Changed out to 16 x 25x1 filter. System Is operating properly at this point. I am also going to recommend a REME-halo to increase air quality.M#ML180UH090P36B-53 s#1715E14582
Paul A.
Did a maintenance on a gas furnace. Cleaned off the flame sensor also cleaned out the back burner compartment and the blower motor housing. Swapped out to 16 x 20 x 1 filter. Did a combustion test Co level was 49 and the O2 level was 11.2. Also do the amp reading on the inducer motor and blower motor does meet the furnace spec sheet. System is operating properly at this point. M#KG7SA 090C-24B1 s#KGG170709407
Matthew M.
Completed preventative maintenance on high efficiency furnace. Replaced filter. Checked all necessary components for acceptable range and proper performance. Flushed condensate drain to check for any clogs. No clogs at this time. Cycled and tested, system working properly at this time. No charge.
Paul A.
Did a preventative maintenance on a Lennox unit gas furnace. During the maintenance I clean the flame sensor cleared out the pressure switch port. Also did an amp reading on the inducer motor and the blower motor. I cleaned out the burner compartment as well as the blower motor. The supplied temp was 113°. Swapped out the filter which is 16 x 25 x 1. I system is running properly at this point in time. m#SL280UH110V60C-03 s#5911L23436.
Paul T.
Performed preventative maintenance for a Lennox furnace model #SL280UH090V36B-03, serial #5915E14212. I powered the system down and removed the access panels. I removed and cleaned carbon off of the flame sensor and cleaned out the burners and burner box. The homeowner supplied her own pure air kit however the homeowner bought the wrong size. The homeowner had some spare uv bulbs that I replaced and I installed a 16x25x1 air filter until the homeowner can get the correct Merv air filter. I checked the pressure switch for clogs and tested the drain line and condensate pump with several bottles of water to ensure that there are no leaks or clogs. I checked all electrical connections to ensure that they are secure and in good condition. I powered the system back up and called for heat. I took a combustion analysis test and received the following readings, o2 is at 12.2% and the co levels are 5ppm. The inducer motor amp draw is at .21 and the blower motor amp draw is at 4.6. The system is