Chud has provided air conditioning, heating, water heater, air quality and duct cleaning services to the residents of Rydal, PA and the surrounding areas since 1970! We’re committed to providing first class air conditioning service to all of our clients.
We’re the AC experts. But don’t take our word for it. Check out our reviews and find out why your neighbors consider us to be their nearby Rydal, PA heating and air company that specializes in air quality and duct cleaning.
Local Reviews
for Rydal, PA
Our Reviews by City
Great service!
Anne - Rydal, PA 19046
Keith and Andrew were awesome. They were friendly, expedient, and very knowledgeable.
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Anne, everyone at Chud appreciates it!
Great service, installed a heating unit and left my house in pristine condition!
Gary - Rydal, PA 19046
I will always use Chud for my heating and air conditioner needs
Response from Chud Air Conditioning & Heating:
Hi Gary, we appreciate the great review! We look forward to many years working together.
Christian was really knowledgeable and provided great service.
Elizabeth - Rydal, PA 19046
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Elizabeth, everyone at Chud appreciates it!
Chud goes above and beyond
Alex - Rydal, PA 19046
Chud has overseen the installation and maintenance of our dear old house's heating system for 15 years. They always provide us with great, friendly service and reasonable rates. Paul is great!
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Alex.
Annual Maintenance
Matthew - Rydal, PA 19046
Frank came out to check on my boiler and a couple of mini splits as part of annual maintenance and he was thorough, thoughtful, and incredibly nice. He spent a couple of hours looking everything over and asking questions from both my wife and I. Chud never dissapoints.
Response from Chud Air Conditioning & Heating:
Hi Matthew & Heidi, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Great service
thesirin - Rydal, PA 19046
Response from Chud Air Conditioning & Heating:
Polina, thank you for the 5 star review!
Very nice
Maryanne - Rydal, PA 19046
Good
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Maryanne! The Chud team appreciates it.
Great Service
Cory - Rydal, PA 19046
John was incredibly friendly, on time, and identified and fixed our issue quickly.
Response from Chud Air Conditioning & Heating:
Thank you for the positive feedback and review Cory!
Great family business. People who care and do great work.
Alex - Rydal, PA 19046
The whole team from amanda at hq to frank in the field are all awesome. We have an old house that needs love and they treat her well. Will be a long time customer.
Response from Chud Air Conditioning & Heating:
Hi Alex, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Great friendly service
Steve - Rydal, PA 19046
I have dealt with Chud a few times now. From the kind folks who manage the appointments to Paul, the service technician, they are extremely friendly and the service is terrific!
Response from Chud Air Conditioning & Heating:
Hi Steve, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Good service
Marie - Rydal, PA 19046
The techs always show up on time and are always pleasant and knowledgeable
Response from Chud Air Conditioning & Heating:
Thank you for the kind words and 5 star review Gary & Marie.
5
Barbara - Rydal, PA 19046
Response from Chud Air Conditioning & Heating:
5 stars, thank you Barbara!
Great Service
Jan - Rydal, PA 19046
Technician is very thorough. Technician explains things very clearly.
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Jan, everyone at Chud appreciates it!
Great Service
Darren - Rydal, PA 19046
Took time to clearly explain condition of system and future maintenance needs.
Response from Chud Air Conditioning & Heating:
Hi Darren & Michelle, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Great Service!
Jan - Rydal, PA 19046
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Jan!
Great service
Jan - Rydal, PA 19046
Response from Chud Air Conditioning & Heating:
Jan, thank you for the 5 star review!
Paul T.
Replace fan motor and control board on condenser Manufacturer Lennox Model # XC25-036-230-01 Serial # 5815J14577 Came out today to replace a fan motor, fan blades and outdoor control board. I removed the Icomfort thermostat from the base and powered down the system. I removed the access panels and begun to disconnect the control board. I installed the new one wire for wire. Removed the old fan motor and fan blade. I installed a new one and made all the proper adjustments to the height of the fan blades. Once everything was reconnected I powered the system back on and reattached the thermostat. I called for ac and observed the system starting normally. The system is operating properly at this time.
Shane A.
Customer had no heat. Board said burners where not lighting. I cleaned the flame sensor and the unit worked fine. Replaced the flame sensor unit should be replaced but customer is not ready. Manufacturer Lennox Model # G50UH-36B-090-02 Serial # 5801K25519
Shane A.
Customer had a error on the thermostat. After looking over the unit than motor was bad. And control board we will be replacing these parts under warranty. Manufacturer Lennox Model # XC25-036-230-01 Serial # 5815J14577
Keith R.
Performed air duct cleaning and sanitation on a 3 bedroom single system house. All vents and ductwork are clear of dust and debris at this time. System is functioning properly at this time. Recommend duct cleaning every 3-4 years. Thank you for your business!
Paul T.
Came out to to inspect a Bryant furnace that was not heating. Upon arrival I called for heat and observed the system trying to start. Once the system received power the inducer motor tried to start but is seized. I powered the system down and tried to turn it by hand but had no luck. I removed the flue to ensure that there was nothing preventing the inducer motor from turning. In order to get the system operational the inducer motor and pressure switch will need to be replaced. I presented the homeowners with several options. The homeowner would like to speak to a comfort advisor about replacement. I was able to get the homeowner in contact with Steve and he will be meeting them tomorrow. Collecting for diagnostics. Bryant furnace model #31aav060155aaja, serial #1204a27827. Homeowner currently has no heat.
Shane A.
Client had not hot water. Gas valve is bad. Due to age I recommend replacing the water heater. I showed clients the prices and she will call the office if she want to move forward with the project. Bradford white Model # MI5036FBN Serial # GG13712587
Matthew M.
Completed Goodman system installation. Replaced furnace, evaporator coil, and condenser. Adapted to existing ductwork, electrical, lineset, gas line, venting, and drain. Added clean out fitting to drain line and flushed. Replaced thermostat with Honeywell T4. Outside replaced disconnect box, whip, and pad. Cycled and tested, system working properly at this time.
Matthew M.
Turned ac unit into a heat pump. Installed new condenser pad, with heat pump risers, new high voltage disconnect box, with new high voltage wire with 60 amp breaker. ran new low voltage wire to condenser. and installed new Honeywell red link thermostat kit. Did r-11 acid flush on the line-set. Adapted to supply and return 16x20x1 filter. Ran new gravity drain. Install 10kw heat pack. System is operating properly at this point.
Paul T.
Performed preventative maintenance for a carrier furnace model #58STA155---13120, serial #3307A15780. Upon arrival the system was calling for heat. I raised the temperature about 10° and took a combustion analysis test. I received the following readings, o2 is 9.3% and the co levels are 18ppm. The inducer motor amp draw is 1.5 and the blower motor amp draw is 3.8. I powered the system down and removed and cleaned carbon off of the flame sensor and cleaned out the burners and burner box. Checked all electrical connections to ensure that they are secure and in good condition. Replaced the Merv11 air filter size 20x25x5. Checked the pressure switch for clogs. The Reme halo uv bulb is still in good condition. Performed humidifier service for a healthy climate humidifier. I removed the old water panel and cleaned out the tray, housing and drain. Installed a new #35 water panel . I powered the system back up and called for heat. Checked for proper operation and leaks. The system is operating
Christian C.
Arrived on site to assess no heat call on Bryant furnace. Upon arrival homeowner showed me that the thermostat read below desired temperature and unit wasn’t turning on. Upon further inspection, I turned off unit at the disconnect for about a minute. When power was cycled back on unit ran in normal operation For about 30-45 minutes with no error codes or stoppages in system operation. I checked flame sensor to ensure there was no stoppage from carbon build up. I returned to the thermostat and cycled power from there. System cycled on and off properly from thermostat. System is working properly at this time. <br> <br> Model # 311AAV066135ADJA<br> Serial # 2408A31146
Christian C.
Arrived on site to assess no heat call on second floor Payne furnace. Upon assessment I found the system was flashing error code 31 stating that the high pressure switch would not open. System was not allowing gas to pass for system to fire. To verify if it was the gas valve, I checked the pressure switch operation to ensure it wasn’t stuck closed. I removed the inlet pipe to the inducer fan to verify there was no clogs in the piping. Checked drain line on gravity drain for clogs as well. Verified power to pressure switch. Cycled power after verifying no clogs anywhere and that there was power to switches and system still did not fire. Believe the gas valve to be bad. Will not be able to perform preventative maintenance at this time Model # PG96VAT42060BAAA Serial # 1214A51537 Performed preventative maintenance on a carrier heat pump in attic and Payne furnace in basement. I performed a combustion analysis test on furnace. I checked all electrical connections on both units I did not
Shane A.
Did a maintenance on two gas furnace. M#TUD1B100A9451BB s#184633BU1G. I cleaned the flame sensor changed out the 16x25x1 filter. Customer said that the unit is making a loud noise. The noise I heard was normal operation. Also cleaned out the burner box and blower motor housing. Did a amp check on the blower motor and inducer motor and they both met the furnace specs. M#THU1C080A9601CB s#18426MDU2G cleaning the flame sensor and cleaned the burner box and blower motor housing. Did a amp check on the blower motor and inducer motor and both met the furnace specs. Changed out the 16x25x1 filter. Also cleaned trap and made sure the drain was draining properly. Both systems are operating properly at this time.
Christian C.
Performed preventative maintenance on a PB boiler upon arrival I took a combustion analysis test and the O2 is 6.0% and the CO is 5. Checked drain lines to ensure there are no clogs or leaks. Watched system fire up when power was restored and had a call for heat. Cleaned out interior of boiler housing with vacuum. System is operating properly at this time.
Paul T.
Performed preventative maintenance for a Lennox furnace model #G60UH-48C-110-10, serial #5910F16893. I powered the system down and removed the access panels. Removed and cleaned carbon off of the flame sensor and cleaned out the burners and burner box. Replaced the air filter size 16x25x1. Checked the pressure switch for clogs. Checked all electrical connections to ensure that they are secure and in good condition. The blower motor and blower wheel are clean and in good condition. I powered the system back up and called for heat. I took a combustion analysis test and received the following readings, o2 is 14.2% and the co levels are 19ppm. The inducer motor amp draw is 1.1 and the blower motor amp draw is 4.7. The supply temp is at a 134°F. I observed the system shut down once it reached the desired temperature. The system is operating properly at this time.
Keith R.
Performed a first floor dryer vent cleaning. Dryer vent, duct, flex hose and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time and exhaust flow is optimal. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Jonathan C.
Installed Weil McLain high efficiency boiler and triangle tube indirect water heater. Added taco zone control panel, 2 taco zone valves, 3 circulators, isolation valves, all necessary supply,return, and fill line copper piping. Ran trac pipe gas line to boiler. Installed new pvc venting. Ran all new electrical to circulators and zone valves, boiler and storage tank. Bled air from all radiators. Cycled and tested, system working properly at this time. Returned to add additional circulator to supply side of piping between zone valves and spiro vent. Tested, system working properly at this time. Customer will drop off check at office. Collected $9,375.00 by check # 257
Matthew M.
Installed Weil McLain high efficiency boiler and triangle tube indirect water heater. Adapted to existing plumbing, gas lines, electrical, venting, and drains. Installed spirovent air eliminator, auto fill backflow preventer, dhw circulator, purge valves, gas shut off valves, taco zone control panel, 2 new zone valves,expansion tank, wireless Honeywell thermostat. Storage tank and boiler has all air bled out of lines. Will need to return to add extra circulator.
Matthew M.
Replaced 40 gallon gas tall Bradford white hot water heater. Adapted to existing plumbing, flue, and gas. Replaced ball valve on cold side, and added new gas shut off valve. Bled air from all lines. Cycled and tested, system working properly at this time.
Paul T.
Performed preventative maintenance for a high efficiency carrier system model #59SP5A120E241122, serial #1614A48777. I powered the system down and removed the access panels. I removed and cleaned carbon off of the flame sensor and cleaned out the burners and burner box. Checked the pressure switch for clogs and tested the drain line for leaks and clogs. Replaced two 16x25x4 air filters (homeowner supplied).checked all electrical connections to ensure that they are secure and in good condition. I powered the system back up and called for heat. I took a combustion analysis test and received the following readings, o2 is at 8.9% and the co levels are 5ppm. The inducer motor amp draw is at .23 and the blower motor amp draw is 3.4. The system is operating properly at this time. The homeowner had some concerns about heating the second floor bedrooms. The second floor bedrooms have a separate system located in the basement. This system is set up for ac only , no heat. I explained to the ho
Paul T.
Homeowner has a peerless boiler system in the home. In order to perform preventative maintenance a maintenance kit is needed. No charge for today is no work was performed showed office will call the homeowner to reschedule.
Frank B.
Performed preventative maintenance for 3 heating systems. 2 single zone mini split systems and a multi-zone boiler that chud installed in 2020. Inspected all the electrical components. Confirmed proper high and low voltages. Cleaned the washable filters for both mini split systems. Cleaned the burners, flame sensor/spark ignition and burner compartment. Confirmed proper water pressure at 18psi in boiler. Ran system to make sure damper opened and boiler got to set high temperature of 180°. Performed a combustion analysis on the boiler. System is operating at 83.4% efficiency with a CO level of 11ppm. Both mini split systems are Mr. Cool DIY units. They run as they are suppose to but don’t have surge protectors on the disconnect boxes. This runs the risk during storms to fry the control board if a power surge were to happen. I’ve seen it happen on other systems. The heat pump coil near the kitchen is fairly dirty due to being close to the dryer vent. Recommend chemical coil cleaning to p
Frank B.
Customer called for boiler with auxiliary domestic water tank not operating. Customer is scheduled for maintenance next Tuesday but it stopped working so we came out today. Upon inspection I found the high efficiency boiler to have a burned out control board. Found a big burn spot with resistor burned up. Upon doing research I found the brand to be discontinued and no longer available. This high efficiency system is also about 20 years old with outdated components. It’s recommended to replaced the full system due to these reasons. As I did some research I could not find most components through supply stores. We will cancel the maintenance appointment for Tuesday and follow up with new system quotes as well as options.
Jonathan C.
Arrived on site to pressure switch code flashing on control board. Opened flue pipe to check if chimney was blocked and it wasn’t it was clear. Pulled off hose from pressure switch and inducer and cleaned out debris from inducer port going to pressure switch. Tested and cycled furnace 3 times and furnace is operating properly at this time. Highly recommend new 40 gallon gas tall water heater. Water heater is 15 years old and in poor shape.
Jonathan C.
Arrived on site, pilot is out on boiler. Tried to re light and pilot wouldn’t stay lit once releasing pilot button. Pressure relief valve is also leaking along with the expansion tank failing. Expansion tank is very old and mounted up into the floor bay. Air eliminator that expansion is piped into is also failing because customer is getting cold spots in the house. The gas valve and pilot assembly will need to be replaced along with expansion tank and pressure relief valve. The plumbing to remove and replace expansion is extensive and will require multiple fittings. RC quoted $3,375.00 for repair. RC quoted $9,500.00 for replacement of boiler and all parts needed. Install will include new CGa6 175,000 btu boiler with Taco 4 zone circulator control board, 1 1/4 inch spiro vent air eliminator, new expansion tank, new auto fill with back flow preventer, we will replace approximately 4 or 5 corroded isolation valves. I gave customer the option of replacing 4 thermostats for $150 per therm
Keith R.
Performed air duct cleaning and sanitation on a 4 bedroom 2 system house. All vents and ductwork are clear of dust and debris at this time. System is functioning properly at this time. Recommend duct cleaning every 3-4 years. Thank you for your business! ( one vent on the second floor has some microbial growth around the vent. )