We’re the AC experts. But don’t take our word for it. Check out our reviews and find out why your neighbors consider us to be their nearby Cheltenham Township, PA heating and air company that specializes in air quality and duct cleaning.
Local Reviews
for Cheltenham Township, PA
Our Reviews by City
Excellent service
Nick - Cheltenham Township, PA 19012
Paul came out and was through and quick and did a wonderful job with my heater. 5 stars.
Response from Chud Air Conditioning & Heating:
Nick, thank you for the 5 star review, we are grateful that you chose Chud.
Boiler and themostate check
Saint Joseph Convent - Cheltenham Township, PA 19012
Very helpful.
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review. It truly means a lot to the Chud team!
Great
Carole - Cheltenham Township, PA 19012
Paul was great and explained everything.
Response from Chud Air Conditioning & Heating:
5 stars, thank you Carole! The Chud team appreciates it.
Great job
Terrell - Cheltenham Township, PA 19012
On time and good service we’ll train in his field of work
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Terrell, everyone at Chud appreciates it!
Great service.
Sylvester - Cheltenham Township, PA 19012
Response from Chud Air Conditioning & Heating:
Sylvester & Gwen, thank you for leaving Chud a 5 star review!
Great customer service!
Natasha - Cheltenham Township, PA 19012
Response from Chud Air Conditioning & Heating:
Natasha, thank you for the 5 star review!
Excellent Customer Service
Lisa K - Cheltenham Township, PA 19012
Can’t say enough about the professionalism and excellent customer service I just experienced with CHUD. The technician was very professional as well and just a really nice guy. Thank you for your help this past week when our furnace ignitor cracked and left us with no heat.
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Lisa, everyone at Chud appreciates it!
CHUD and their service tech
Lisa K - Elkins Park PA - Cheltenham Township, PA 19012
Called with a heating problem. Came out within an hour and a half the same day I called. Tech very punctual , polite and communicative. Would recommend CHUD to anyone. Have to wait for a part , but otherwise entire transaction was very good.
Response from Chud Air Conditioning & Heating:
5 stars, thank you Lisa!
Great Service
Wayne - Cheltenham Township, PA 19012
Tech completed his visit and job professionally
Response from Chud Air Conditioning & Heating:
5 stars, thank you Wayne! The chud team appreciates it.
Outstanding Service
Barbara - Cheltenham Township, PA 19012
This was a call back based on previous fall maintenance check. There was immediate offer to come back to review.
Response from Chud Air Conditioning & Heating:
Barbara, thank you for leaving the 5 star review! We were happy to come back out and reconfirm everything is working properly with your system.
Chud Duct Cleaning
Tom - Cheltenham Township, PA 19012
Good Job!
Response from Chud Air Conditioning & Heating:
5 stars, thank you Tom & Audrey!
Great guy
Martin - Cheltenham Township, PA 19012
Great guy!!!! Was early, polite, knew what he was doing. Will recommend him and your company !!!! Thank you !!!!!
Response from Chud Air Conditioning & Heating:
Martin, thank you for the kind words and 5 star review. The chud team appreciates it.
Great service with helpful information!
Tom - Cheltenham Township, PA 19012
Our AC broke during a heat spell. We received immediate attention, helpful explanations, and courteous customer service.
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Tom! The team here at Chud appreciates it.
Review
Tom - Cheltenham Township, PA 19012
Great!
Response from Chud Air Conditioning & Heating:
5 stars, thank you Tom!
Great service!
Jessica - Cheltenham Township, PA 19012
Replaced dryer vent, much better than what I previously had. Arrived within the time window provided and cleaned up after. Thank you, Chud!
Response from Chud Air Conditioning & Heating:
Jessica, thank you for the 5 star review! We're so glad Chud was able to help.
Awesome Service
Gail - Cheltenham Township, PA 19012
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Gail.
Best ever!
Tom - Cheltenham Township, PA 19012
Frank was very nice, extremely knowledgeable, and got the job done quickly.
Response from Chud Air Conditioning & Heating:
5 stars, thank you Tom!
Great Service.
Sylvester - Cheltenham Township, PA 19012
He was very knowledgeable and new his job.
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review, we appreciate it Sylvester & Gwen!
Good Shepherd
Sisters - Cheltenham Township, PA 19012
Response from Chud Air Conditioning & Heating:
5 stars, thank you!
Shane A.
Replaced inducer motor. Then cycled unit on and off unit is operating properly at this point. M#TM8Y120C20MP11A s#W1K8221406
Paul T.
Performed preventative maintenance for a Coleman furnace model #TM8Y120C20MP11A, serial #W1K8221406. Upon arrival the homeowner stated that on 12/23 the system was making a grinding noise and then shut down. In order to get heat the homeowner had to reset the system at the shut off switch. The homeowner called another company and was told he needed a new inducer motor. The homeowner also stated that once he removed the Merv filter and inserted a standard filter the system started working working. Upon arrival the system was calling for heat. I took a combustion analysis test and received the following readings, o2 is 14% and the co levels are 8ppm. The inducer motor amp draw is .45 for first stage and 1.34 for the second stage heating. The blower motor amp draw is within normal range. In second stage the inducer motor is hitting the max rated amp draw. Chud installed the system on 5-23-19 and the system should still be under warranty. Checked all electrical connections to ensure that
Jonathan C.
Replaced failed evaporator coil and replaced with new. Pressure tested 300 psi for 30 minutes and held pressure fine. Pulled vacuum on system down to 500 microns. Charged system with nameplate charge of 10 lbs 11 oz of R-410a. Re insulated outdoor suction line. Tested and cycled system and system is operating properly at this time. Collected $965.00 by check#1991
Frank B.
Came out to perform preventative maintenance on a Lennox pump system. On arrival customer stated that the heater hasn’t been working well and compared to her neighbors system her bill is twice as much with the same chud installed system. System was running when I arrived, and the air temperature was 76°, coming out with a home temperature of 70°. I then tested the emergency heat to make sure that it was working OK. Found no issue with the emergency heat. I then opened up the evaporator cabinet panel to see if there was any signs of oil found oil immediately in the drain pan at the heat pump unit outside I found refrigerant lines to be frozen which is also a sign of refrigerant issues. Confirmed that the evaporator is leaking and will need to be replaced to fix the problem. Went onto the LennoxPros account to confirm the warranty. Customer is under manufacture warranty until 11/25/2023. System was installed by chud. We will follow up will repair time, date and any labor charges that app
Matthew M.
Completed Honeywell merv filter cabinet, and return drip installation. Filter size is 16x25x4. Cycled and tested, system working properly at this time.
Shane A.
Did a preventative maintenance on a gas boiler. During the maintenance I did a combustion test, the ppm was 48 and the O2 was 10. Did a amp check on the circulator which was running in the proper range. Pressure of the boiler was sitting at around 17. Watch the unit reach temp of 180° then watch it go back down to 160°F then watch the burners come back on. Check the expansion tank which is still good. Took out the burners and wiped them down of any dust or debris. System is operating properly at this point. M#CGA-4 PIDN s#381357804
Paul T.
Came out today for a no heat call. Upon inspection I found that the RUUD furnace was calling for heat . I observed the system start and run for about then shut down due to high temp. I removed the filter and found that the standard filter size 20x25x1 hasn’t been replaced since I performed preventative on 5-17-22. I explained to the homeowner that this air filter should be replaced every 2-3 months. In addition I highly recommended performing duct cleaning in the home to help improve the air quality. Charged for diagnostics today.
Paul T.
Came out to check on a heat pump system that was installed by chud in 5/2022. Upon arrival the homeowner stated that the thermostat says it is reaching the temp but she still feels cold. The thermostat was set for 75°F and it was indeed 75°F. I turned the system up to 78°F and observed the system heating. The supply temp is at 112°F, the air filter size 16x25x5 air filter was clogged. I replaced it with a standard filter so the homeowner could run the heat. The homeowner stated that she will purchase her own filter. After about 10 minutes the home had reached the desired temperature of 78°F. The system is operating properly at this time. No charge warranty check.
Paul A.
Showed up to a no heat call. Furnace was giving error code of open limit. Noticed the filter was filthy so I change that out and the unit was running fine. Instead of charging for a diagnostic call. I charge for preventative maintenance during the maintenance I changed out the 16 x 25 x 1 filter also clean the flame sensor cleaned out the burner rack and the blower motor housing overlooks the whole system and made sure all electrical connections were tight and secure system is running properly at this point. m#GMEC800803BNAA s#1910119800 customer has very bad water heater set up. He would like to set up a date for a child to come out and give him an estimate/game plan for what to do with his water heaters. Customer paid in cash.
Paul T.
Performed preventative maintenance for a crown boiler model #awr105enst2psu. Upon arrival I called for heat and took a combustion analysis test and received the following readings, o2 is 15.3% and the co levels are 13ppm. The water pressure is at 15psi and the limit is set for 180°F. Inspected the expansion tank and all copper piping for corrosion and leaks. The circulator pump is operating properly. I powered the system down and removed the access panel. Removed and cleaned carbon off of the burners and burner box. I checked all electrical connections to ensure that they are secure and in good condition. I powered the system back up and called for heat. I observed the system heat until it reached the desired temperature. The system is operating properly at this time.
Paul T.
Came out today for a Dunkirk boiler not operating. Model #Bw1aan000105abaa, serial #4100v04737. Upon arrival I found the system calling for heat but there was no heat. Upon inspection I found that the system was not receiving power. I found the emergency shut off switch at the top of the stairs in the off position. I flipped it back on and the system started right up. The system is operating properly at this time.
Frank B.
Returned to replace failed condensate pump. Removed and disposed of old pump. Installed new pump and tested its operation with the system. Pump is working properly at this time. Model #CBX32MV-048-230-6-06 Serial #1612K05258
Paul A.
Did A maintenance on a Lenox gas furnace. During the maintenance I clean the flame sensor, also cleaned out the burner box in the blower motor housing and I also wiped down the entire unit. Also looked over all the electrical connections to make sure they were tight and secure. I also did an amp check on the inducer motor and the blower motor which both meet the furnace specs. I also did a combustion analyzer test the CO level was seven and the O2 level was 17. Customer changed out to 20 x 25 x 1 filter previous to me arriving. System is operating properly at this point. Customer did not want his humidifier serviced. Also going to recommend a new water heater.m#SL280UH135V60D-03 s#5913D04283
Frank B.
Per RC we will return to replace the cartridge on a 0014 Taco circulator first to repair circulator from making rubbing noises. This is no charge due to system under new install warranty. This is first attempt to repair circulator issue. System was running on emergency secondary circulator. After installing the cartridge I tested the system. The primary circulator is now quiet like it should be. Found. O issue after repair. Shut down Emergency circulator and setup the system up the way it should be running. Customer also stated the 2nd floor bedroom at the end of the hall is still not operating properly. Inspected the zone valve again to see what’s going on. Upon inspection I found a broken wire that was not found last time on the zone valve. Cut off the weak section and remounted the wire. Valve opened up and was working without issue as well as presenting 24v. If problem persists a more in-depth repair may be necessary being this has been an ongoing issue. This is a billout. Circul
Frank B.
Came out to perform preventative maintenance for gas furnace. Inspected all the electrical components. Confirmed proper high and low voltages. Replaced the 14x25x1. Cleaned the burners, flame sensor and burner compartment. Performed a combustion analysis on the furnace. System is operating at 81.2% efficiency with a CO level of 64ppm. Found system return ductwork undersized as well as filter is undersized for a 100,000 btu furnace. Steve went over system improvement options and customer is interested in updating to an air cleaner and upsizing return duct work. Steve will follow up on Monday after he draws up the specs. Found microbial growth on the wall in the utility room that needs to be inspected/ tested by a remediation company. System is operating but not at peak performance. These upgrades will maximize system performance.
Paul A.
Do they maintenance on a Lennox heat pump. While starting up the heater I went to the heat pump outside and check the temperatures and pressures which all were in line with the spec sheet on the door of the heat pump. After that I crank the heat up hard to check the emergency heat and the amperage on the heat pack was a in line with the air handler spec sheet. After that I did a drain test from the evaporator coil everything was draining fine the condensate pump was very loud and does seem like it will fail soon. I will be recommending a new condensate pump will need to return I do not have one on my truck. Also shop vac to blower motor and dusted off all the electrical components in the air handler also checked supply and return Temperature. Also changed out to 20 x 24 by one filter system is running properly at this point. M#CBX32MV-048-230-6-06 s#1612K05258.
Frank B.
Performed preventative maintenance for newly installed boiler system. Cleaned burners and burner compartment. Inspected all the electrical components. Inspected piping for any leaking. Confirmed proper high and low voltages. Performed a combustion analysis on the boiler. System is operating at 83% efficiency with a CO level of 10ppm. PA was out April 2022 for primary circulator making a bunch of noise. Retested the circulator since it was shut down to see if there’s issues with it. Upon inspection I found the circulator still making rubbing noise. Spoke with RC and he recommended replacing the cartridge for the taco 0014 as first attempt to repair the circulator. This is covered under new install warranty. Will have to return to replace the cartridge. I also was out to inspect the heat zone down the far end of the second floor. Made adjustments to wires and was able to get it running. The thermostat was operating as it should as well as confirmed proper low voltage. FWI for boiler main
Paul A.
Return to gather photos for registration purposes and verify correct model and “CP” for newly installed Weil McLain gas boiler. All information is correct and photos are attached to this survey visit. Homeowner is very pleased with the new install and reports no concerns or issues. N/C. Weil McLain M#CGa 5-PIDN, CP8033622. (Gas fired boiler).
Matthew M.
Completed Weil McLain boiler installation. Also installed 2 zone taco zone control panel and 2 taco zone valves with 2 Honeywell T1 thermostats. Adapted to existing electrical, gas, flue, and plumbing. Installed auto fill back flow preventer and spirovent air eliminator. Replaced st 12 expansion tank. Added new isolation valves and new copper fittings. Cycled and tested, system working properly at this time.
Paul A.
On arrival boiler was not operable. No water pressure in system and pilot was out. After looking over the boiler and the controls I advised the homeowner that the boiler system should be upgraded. I did not perform any maintenance service on the boiler because there are multiple issues. As a courtesy, I was able to get the pilot lit but this will not be a reliable heat source for the season. Outdated expansion tank, no automatic fill valve, no LWCO, purging valves are corroded. I provided homeowner with a written proposal to upgrade the system entirely based on age and condition for a reliable heat source this season. ***Waived diagnostic fee with signed proposal today***
Paul T.
Performed preventative maintenance for 2 ductless mini splits. Removed and cleaned the air filters on both systems. Tested for ac and heat temperature readings are 103°/50° for the system in the chapel and 101°/48° for the system in the basement. Drain lines are all clear as well. Performed preventative maintenance for a crown boiler system model #Awr245enst2psu, serial #crownb000663102. Removed and cleaned carbon off the flame sensor, cleaned out the burners and burner box. Water pressure is at 15psi, the limit is set for 180°F. Checked all electrical components needed for heating to ensure that they are secure and in good condition. Tested the system by calling for heat and performed a combustion analysis test. Readings are as followed, o2 13%, co 4ppm and the system is operating at 88% efficiency. The system is operating properly at this time.
Paul T.
System is calling for fan but the blower will not operate. Blower is receiving the proper voltage to operate. System was installed by chud in 2017 although the homeowner did not live here at that time. Please contact the homeowner with a proper repair quote. Lennox system model #sl280uh090v36b-04, serial #5917j13662. 8/31/22-PT- installed a new blower motor for the Lennox furnace. Connected all the proper wiring and tested the system. The system started without any issues. Called for ac and got a temperature split of 20. Homeowner has a Merv16 16x25x5 air filter that he will replace himself. Drain lines are clear and pump is operating. The system is operating properly at this time. Recommend performing maintenance on both systems. In the fall for heat maintenance and in the spring for ac maintenance.
Paul T.
Came out today for a Lennox system not operating properly. Upon inspection I found that the system had an error code of E201 indoor blower communication failure. The blower motor is receiving the proper voltage to operate but it still won’t turn on. Recommend replacing the blower motor to get the system operational. Chud office will have to reach out to the homeowner with a proper repair quote. Lennox system model #sl280uh090v36b-04, serial #5917j13662.
Paul T.
Came out today for for a system leaking. Upon inspection I found a puddle of water on the floor under the condensate pump. The evaporator coil’s are clean and in good condition. The drain pan is clear and there are no signs of water or that the system froze. The water is isolated at the pump area. The pump is old I recommended replacing it and the homeowner agreed. Installed a new pro select 115volt condensate pump. Connected all proper wiring and tested the system. The system is operating properly at this time. No charge for the call per PA.
Paul A.
Diagnostic work performed for a no ac call call. Found multiple issues including failed outdoor disconnect, locked rotor compressor and system completely void of refrigerant charge. Chud will provide quote today via email to replace the full system. Collected diagnostic fee for coming out today. If homeowner wants to move forward with new system we will collect 50% deposit and balance on completion.