Chud has provided air conditioning, heating, water heater, air quality and duct cleaning services to the residents of Chalfont, PA and the surrounding areas since 1970! We’re committed to providing first class air conditioning service to all of our clients.
We’re the AC experts. But don’t take our word for it. Check out our reviews and find out why your neighbors consider us to be their nearby Chalfont, PA heating and air company that specializes in air quality and duct cleaning.
Local Reviews
for Chalfont, PA
Our Reviews by City
Thanks
Ira - Chalfont, PA 18914
Response from Chud Air Conditioning & Heating:
Ira, thank you for leaving Chud a 5 star review!
Winter service
Richard - Chalfont, PA 18914
Good experience, Shane was on time, efficient and professional.
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Richard. It truly means a lot to the Chud team!
Knowledgeable and honest service
Charles - Chalfont, PA 18914
Response from Chud Air Conditioning & Heating:
Charles, thank you for the 5 star review!
Dryer vent cleaning
Richard - Chalfont, PA 18914
Professional and efficient
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Richard.
Dryer Vent Cleaning
Kevin - Chalfont, PA 18914
I was able to schedule an appointment right away. The Chud team arrived on time and were very professional. My dryer vent exits above a second story window and snakes through 2 walls, so it was a bit tricky. I'm very happy with their work.
Great service!
Jeff - Chalfont, PA 18914
Response from Chud Air Conditioning & Heating:
Jeff, thanks for the 5 stars!
Keith R.
Performed a 2nd floor dryer vent cleaning and removed clog. Dryer vent, duct, flex duct and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time and exhaust flow is optimal. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Paul T.
Installed a new 80 gallon electric Bradford white hot water. I isolated the old hot water heater and drained it out. Once the system was drained I disconnected the wiring and cut the copper lines. Installed a new 80 gallon electric hot water heater and used 3/4 copper pro press fittings. I made sure all the wiring was wired properly. I opened the cold water side and checked my fittings for leaks. Once the system was filled I powered the system up. I let the homeowner know it will take a couple of hours for the water to heat properly. The system is operating properly at this time. Model #Sle280t6-1sevv, serial #Yl50525329.
Shane A.
Replaced existing expansion tank with m# PFXT5I. After installing the tank I bled out the sinks then started the water heater and made sure their was no leaks. System is operating properly at this point.
Shane A.
Did a maintenance on a Goodman gas furnace. During the maintenance I clean the flame sensor, also cleaned out the burner box and the blower motor housing. Checked amps on the inducer motor and blower motor which both me to furnace specs. Changed out the 20 x 28x 4 pop-up filter. Also cleared out inducer port. System is operating properly at this point. I will be recommending a new expansion tank for the water heater because it has failed. M# GMEC800804BNAA s#1908095594
Shane A.
Did a preventative maintenance on a LP furnace. During the maintenance I clean the flame sensor. Cleaned out the burner box and the blower motor housing. Did a amp check on the inducer motor and the blower motor which both meet the furnace specs. Changed out the 20 x 25 x 1 filter did a combustion test the ppm was 31. Also cleaned out the trap and made sure it was draining properly and service the humidifier changed out the number 35 panel wiped the entire thing down and made sure the drain was clear. System is operating properly at this point. M#EL296UH110XV60C-05 s#5915K06383
Shane A.
Did a preventative maintenance on a gas furnace. Clean the flame sensor, did an amp check on the inducer motor and the blower motor Both are running in furnace specs. Also did a combustion test the ppm what is 31 oxygen level was 8 and The efficiency was 93%. Customer changed out 16 x 25 x 5 filter. Also made sure it was draining properly and that the condensate pump is working. System is operating properly at this point. M# SLP98UH090V60C-02 s#5911E22738
Paul A.
Did they maintenance on a Lennox gas furnace. During the maintenance I clean flame sensor and ohm the HSI. Also did a combustion test the PPM was 21 and the O2 was 19. Cleaned out the burner box and the blower motor housing. And I did an amp check on the inducer motor and blower motor which both meet the furnace specs. And changed out the 16 x 25 x1 Filter. System is operating properly at this point m#EL280UH070E36A-01 s#5919G14317 customer would like receipt mailed to them.
Jonathan C.
Performed a 4 bedroom duct cleaning. Hooked up the hepa vacuum and blew out each supply and return vent with compressed air. We also cleaned the supply and return truck lines. After that we sanitized throughout all ductwork. System is working properly at this time.
Keith R.
Performed air duct cleaning and sanitation on a 3 bedroom single system house. All vents and ductwork are clear of dust and debris at this time. System is functioning properly at this time. Recommend duct cleaning every 3-4 years. Performed rooftop dryer vent cleaning from the inside using brushes. Dryer vent, duct, flex hose and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Frank B.
Performed a preventive maintenance for air-conditioning system. This maintenance free with new install. Didn’t need to replace the #401 Media Air Filter at this time. Filter was still in fair shape. Customer does supply them. Inspected all the electrical components. Inspected the gravity drain that goes to the French drain 4 feet away. Drain piping is clear flowing without restrictions. Tested the amp draw from the compressor, blower and fan motor. All are operating within manufacturer spec. Tested the temperature split between the supply and return. System is operating at a 20° differential on an 88° day. Wrapped a little bit of insulation around the TXV due to it sweating causing moisture to run down the coil cabinet into furnace. Insulation will prevent it from sweating. Confirmed proper high and low voltages. System is operating properly at this time.
Sebastian R.
Performed preventative maintenance on Lennox AC system. Replaced 20x25x1 air filter provided by the customer. Tested evaporator coil pan and condensate drain line for proper drainage. Temperature split is at 22° With a supply air temperature of 46°. This unit has bathe proper refrigerant charge. Compressor-7.2 RLA Condenser fan motor-1.0FLA . Both of these readings are within the amperage rating for this unit. System is operating properly at this time and is ready for the upcoming season.
Paul T.
Removed the old condenser coil. Installed the new condenser coil and brazed in all connections. Pressure tested with nitrogen to ensure that there are no leaks. Pulled a vacuum and got the system to 500 microns. I charged the system with 7lbs of 410-A refrigerant and ran the system. The system has a temperature split of 20°. And the refrigerant pressures are 110/253. The system is operating properly at this time and is ready for the air conditioning season.
Paul T.
Came out today for a Lennox heat pump that has a leak in the condenser coil. Lennox heat pump model #14hpx-030-230-22, serial #1918j10671. Upon arrival the homeowner stated that another company came out to investigate the system not operating (through the home warranty). They charged the system with nitrogen and told the homeowner he had a leak. Upon arrival the system had a slight nitrogen charge and I could hear it leaking. I used micro leak bubbles around the area that was hissing. Sure enough there is a leak in the elbow of the condenser coil. The condenser coil will have to be replaced and the system should be covered under the manufacture warranty.
Anthony C.
Performed preventative maintenance on Lennox Gas Furnace. Filter does not need to be replaced until the Spring of 2022. Cleaned and inspected burners, flame sensor and blower compartment. Raised temperature two degrees and verified sequence of operations. System is working properly at this time and is ready for the season!
Paul T.
Performed preventative maintenance for a high efficiency Lennox furnace. I observed the system starting normally. I took a combustion analysis test and got the following readings, o2 is at 10%, co is at 3ppm and the system is operating at 93% efficiency. The amp draws for the blower motor and inducer motor are within normal range. I observed the system shut down normally once it reached the desired temperature. I removed and cleaned carbon off of the flame sensor. Cleaned out the burners and burner box. Checked all electrical components needed for heating. The homeowner recently replaced the air filter and water panel on the humidifier. The system is operating properly at this time.
Keith R.
Performed dryer vent cleaning. Dryer vent, duct, and flex hose is clear of lint at this time. Dryer is brand new so lint trap did not need to be cleaned. Dryer is functioning properly at this time. Recommend dryer vent cleaning every 1-2 years. Thank you for your business! Customer had a 10% off coupon
Frank B.
Performed preventative maintenance for gas furnace. Cleaned out burners and flame sensor. Replaced the one inch air filter. Inspected all electrical components. Performed a combustion analysis. System is operating at 84% efficiency with a CO level of 9ppm. Inspected the gas piping for any leaks. No leaks present at this time. System is operating properly at this time.
Keith R.
Performed air duct cleaning and sanitation on 2 systems. All vents and ductwork are clear of dust and debris at this time. Both units are functioning properly at this time. Recommend duct cleaning every 2-3 years. Thank you for your business!
Paul T.
Came out today for a system that was frozen. I checked the filter, blower, temperature split and pressures. I noticed that the sb cooling was slightly off so I added 2 lbs of 410-A refrigerant. The pressures and superheat and subcool are now in normal range. The temperature split is at a 20. The system is operating properly at this time.
Paul A.
Preventative maintenance on Lennox HVAC system. Replaced MERV filter. Verified proper R-410a refrigerant charge. Inspected indoor and outdoor coils. Tested drains and pump. System is operating properly and ready for the season. Left several Indoor Air Quality solutions to prevent mold/mildew growth in ductwork, and kill airborne bacteria and viruses.
Paul A.
Replaced service disconnect box and 1/2†service line to ac unit. Completed preseason tune up on Lennox/Carrier HVAC system. Tested drains, inspected air filter (20x25x1) and checked amperage and voltage on components. Verified R-410a refrigerant charge is correct, no adjustments necessary. System is working and ready for the season.
Frank B.
Performed a preventive maintenance for air-conditioning system. This maintenance free with new install. Replace the customer supplied #401 Media Air Filter. Inspected all the electrical components. Inspected the gravity drain that goes to a condensate pump. Drain piping is clear and pump is functional. Tested the amp draw from the compressor, blower and fan motor. All are operating within manufacturer spec. Tested the temperature split between the supply and return. System is operating at a 20° differential. System is operating properly at this time.
Paul T.
Performed preventative maintenance for a Lennox indoor unit. Checked drain pan and drain drain line for any possible clogs. Replaced air filter (20x25x1). Evaporator is clean. Bryant condensing unit is not working due to break in the whip. Return visit required to replace whip and complete the Preventative Maintenance. No charge today due to return visit.
Keith R.
Performed dryer vent cleaning. Dryer vent and duct is clear of lint and debris at this time. Dryer is functioning properly at this time. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Keith R.
Performed air duct cleaning and sanitation. All vents and ductwork are clear of dust and debris at this time. Unit is functioning properly at this time. Recommend duct cleaning every 2-3 years. Thank you for your business!