We’re the AC experts. But don’t take our word for it. Check out our reviews and find out why your neighbors consider us to be their nearby Ambler, PA heating and air company that specializes in air quality and duct cleaning.
Local Reviews
for Ambler, PA
Our Reviews by City
Job well done
John - Ambler, PA 19002
The team did an awesome job! Very friendly and professional.
Response from Chud Air Conditioning & Heating:
John, your 5-star review means a lot to us, thank you!
Excellent service
Moses - Ambler, PA 19002
Response from Chud Air Conditioning & Heating:
Moses, thank you for leaving Chud a 5 star review!
Excellent Service
John - Ambler, PA 19002
Response from Chud Air Conditioning & Heating:
5 stars, thank you John!
Excellent service as always!
Rob - Ambler, PA 19002
From start to finish, this was the easiest that I can possibly be. Scheduling and service team always does an A1 job. Prompt professional and friendly. Highly recommend.
Response from Chud Air Conditioning & Heating:
Hi Rob, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Excellence
Jay Yanoff - Ambler, PA 19002
They did an excellent job. Rate them a 10plus.
Response from Chud Air Conditioning & Heating:
10+, thank you Jay & Marcia, we are grateful you continue to choose Chud!
Great service
Jen - Ambler, PA 19002
Frank is simply the best. Very helpful thorough and friendly.
Response from Chud Air Conditioning & Heating:
Jen, thank you for the 5 star review, we are grateful that you chose Chud.
Excellent service by a thorough professional
Chandrasekar - Ambler, PA 19002
Frank was awesome. Very knowledgeable and very helpful. He not only did the work very professionally, he also explained and wrote a fever steps down for me to follow. An awesome experience for me!
Response from Chud Air Conditioning & Heating:
Chandrasekar, we’ll make sure to pass your kind words along to Frank, who we know will be delighted to read your comments.
Humidifier leakage issue
Chandrasekar - Ambler, PA 19002
Response from Chud Air Conditioning & Heating:
5 stars, thank you Chandra!
Great service
Terrence - Ambler, PA 19002
Response from Chud Air Conditioning & Heating:
5 stars, thank you Terrence!
Duct cleaning: Easy to schedule and thoughtful service
John - Ambler, PA 19002
It was easy to schedule the duct cleaning on a day we wanted. The serviceman, Keith arrived promptly, explained in detail exactly what and how he would service our duct work, and efficiently went about his work. Keith and his assistant were pleasant and informative. They cleaned up completely without disturbing any of our property. Highly satisfied!
Response from Chud Air Conditioning & Heating:
Hi John, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Great staff and timing
Michael - Ambler, PA 19002
The 2 service techs that came out were thorough and answered questions. They were on time. Appointment setter was able to schedule us on short notice.
Response from Chud Air Conditioning & Heating:
Hi Michael & Jennifer, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Great services and good price
Jim - Ambler, PA 19002
Excellent service
David - Ambler, PA 19002
Chud never fails to impress with their fast service and professional technicians. They are a first-rate company.
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you David & Jennifer.
Fast, professional, excellence
Bob - Ambler, PA 19002
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Bob, everyone at Chud appreciates it!
Very professional
Josephine - Ambler, PA 19002
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews! Thank you Josephine.
Excellent service!
Julie - Ambler, PA 19002
Keith and his partner (sorry I forget his name) showed up on time and ready to work on my dryer. They were both friendly and very sweet with my 3 dogs- major bonus! They told me what they would be doing and explained who was working on each part of the project. They were efficient, and did a great job! Also, making the appointment and the follow up- including text reminders made the experience smooth and really easy! I am extremely pleased with the work and will absolutely use Chud in the future. Thank you!
Response from Chud Air Conditioning & Heating:
Hi Julie, we appreciate the good review. Chud works hard to create a good experience and reviews like this make it all worth it!
Great Job! Quick and clean !!
Josephine - Ambler, PA 19002
I called and they were here within an hour cleaned my dryer vent within 30 minutes and they were polite they were quick and clean!
Response from Chud Air Conditioning & Heating:
Glad everything worked out so well Josephine! Thank you for the 5 star review.
Excellent service
Lawrence - Ambler, PA 19002
Response from Chud Air Conditioning & Heating:
5 stars, thank you Lawrence!
Recent maintenance
Greg - Ambler, PA 19002
Response from Chud Air Conditioning & Heating:
Thank you for the 5 star review Greg! The Chud team appreciates it.
Great experience
Michelle - Ambler, PA 19002
Needed a new HVAC company to help us navigate through the tornado disaster that devastated our house. A friend recommended Chud and we were pleasantly happy with the results Frank was a terrific technician that helped explain in detail all of our issues. Thumbs up!
Response from Chud Air Conditioning & Heating:
We are so glad Chud was able to help you in your time of need! Please let us know if there is anything else we can help you with.
Excellent service
Moses - Ambler, PA 19002
Response from Chud Air Conditioning & Heating:
5 stars, thank you Moses!
Fast, Friendly, Efficient, Professional
Sean - Ambler, PA 19002
Frank arrived exactly on time, was very pleasant and professional, and offered great insight into the service needed. He quickly diagnosed and fixed the system to get your air back quickly. I would highly recommend Chud again!
Response from Chud Air Conditioning & Heating:
Thank you for sharing your experience Sean! Everyone at Chud appreciates it.
Great service
Me - Ambler, PA 19002
I would call Chudd again . My dryer is working better !
Response from Chud Air Conditioning & Heating:
The team here at Chud loves to see 5 star reviews, thank you Mary!
Excellent follow up service
Moses - Ambler, PA 19002
Paul provided an excellent service today. His troubleshooting ability and detailed explanation was very satisfactory. In addition, he did a thorough step-by-step testing with me and I really appreciate it. Thanks.
Response from Chud Air Conditioning & Heating:
Moses, we’ll make sure to pass your kind words along to Paul, who we know will be delighted to read your comments. Everyone at Chud appreciates your positive feedback.
Five star Service
Rob W - Ambler, PA 19002
Response from Chud Air Conditioning & Heating:
Rob, thank you for leaving Chud a 5 star review!
Paul T.
Came out today for a no heat call on a navien tankless boiler system. Serial #7970C2242801001 , mode#NHB-110 ( NG). Upon arrival the homeowner had the system unplugged so there was no error code. I removed the access panel and removed the spark ignition assembly and found buildup carbon and rust. I re installed the ignition assembly and powered the system back up to observe what would happen. The system fired up without any issues. I let the system run for over a half hour with the thermostat set at 70°. I took a combustion analysis test and received the following results, o2 is at 6.1% and the co levels are 24ppm. I checked the exhaust and fresh air intake outside to ensure that there was nothing blocking the flow of exhaust or fresh air. The only issue I could find was the rusted igniter assembly (see photos) Chud will have to return with the igniter assembly and install it under warranty. The system is only 5 months old. The system is operating at this time. No charge for todays ca
Shane A.
Replaced HSI ON Trane unit. After replacing the part I completed a preventative maintenance on the unit. Did a combustion test the ppm was 19 and the o2 was 9.7. Changed the 16x25x1 filter. Did a amp check on the blower motor and inducer motor. Both are operating at high amperage, unit is operating properly but should be replaced in the near future. Manufacturer Trane Model # TUD120C960J0 Serial # P4166JM2G Replaced the gas valve and pressure switch on a Goodman furnace. After part replacement I completed a preventative maintenance. Changed the 16x25x1 filter. Did a combustion test the ppm was 28 and the o2 was 12. Did a amp check on the blower motor and inducer motor both are in range of the name plate. Unit is operating properly at this point. Manufacturer Goodman Model # GMH80804BNBB Serial # 1402123783 BILL OUT
Keith R.
Performed a 2nd floor dryer vent cleaning. Dryer vent, duct, flex hose and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Shane A.
Did a FWI air conditioner maintenance. Did a amp check on the blower motor. Cleaned out p trap. Delta t was 18. Made sure unit was draining properly. Did a amp check on condenser fan motor and compressor bothe are in range with units name plate. Filt size 20x23x1. System is operating properly at this point. Manufacturer Goodman Model # ASPT49D14AC Serial # 2008262943 Model # GSX160481FH Serial # 2010157838
Keith R.
Performed a second floor dryer vent cleaning. Dryer vent (soffit) duct flex and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time and exhaust flow is optimal. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Paul T.
Surveyed the home for dryer vent cleaning. See photos
Paul T.
Performed preventative maintenance for a Rheem AC system. I powered the system down and removed the access panels. The evaporator coil’s are clean and in good condition. Tested the drain line with water to ensure that there are no leaks or clogs. Inspected all electrical connections to ensure that they are secure and in good condition. The blower wheel is clean and in good condition. Replaced the air filter size 20x25x1 located in the hallway ceiling. I re attached the panels and powered the system up. I called for AC and observed the system starting normally. The condenser coils are clean and in good condition. The condenser amp draws are 1.21 for the fan and 6.75 for the compressor. All electrical connections are secure and in good condition. The temperature split is at a 20°. The system is operating properly at this time. No charge FWI
Paul T.
Came out today to perform heat and ac maintenance for a Goodman furnace and condenser. Upon arrival I raised the temperature by 10°. I observed the system starting normally and removed the access panel. Goodman furnace model #GMVC960803BN , serial #2005286605 . I took a combustion analysis test and received the following results, o2 is at 9.7% and the co levels are 7ppm. The inducer motor amp draw is at .45 amps. The blower motor amp draw is 4.8. Replaced the air filter size 16x25x1. Removed and cleaned carbon off of the flame sensor. Cleaned out the burners and burner box. Checked all electrical connections to ensure that they are secure and in good condition. Tested the drain line and condensate pump with several bottles of water to ensure proper operation and that there are no clogs. I fired the system back up and checked for proper operation. Performed ac preventive maintenance for a Goodman condenser model #GSX16S301, serial #2008085017. The evaporator coil’s are clean and in go
Keith R.
Per Returned to perform a second floor drive-in cleaning. Dryer vent, duct, flex, hose, and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time and exhaust flow is optimal. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Keith R.
Performed a first floor dryer vent cleaning. Dryer vent, duct, flex duct and lint trap are all clear of lint and debris at this time.dryer is functioning properly at this time and exhaust flow is optimal. Recommend dryer vent cleaning every 1-2 years. Installed bird guard to prevent mice from entering vent.
Keith R.
Performed air duct cleaning and sanitation on a 4 bedroom dual system house. All vents and ductwork are clear of dust and debris at this time. Both systems are functioning properly at this time. Recommend duct cleaning every 3-4 years. Will need to reschedule dryer vent cleaning as it is a second floor vent in a sketchy spot and it is currently snowing. We will honor the $99 dryer vent cleaning but anything over a half hour we will have to charge for labor. Thank you for your business!
Keith R.
Cleaned out filter slot. Area is clear of debris at this time. Customer has a train unit so you cannot access the area easily due to blower compartment being sealed. Also informed client their dryer vent appeared to be clogged so they agreed to have us perform dryer vent cleaning to resolve the issue.
Keith R.
Performed a first floor dryer vent cleaning. Dryer vent, duct, flex hose and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time and exhaust flow is optimal. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Keith R.
Performed a first floor dryer vent cleaning. Dryer vent, duct, flex hose and lint trap are all clear of lint and debris at this time. Dryer is functioning properly at this time and exhaust flow is optimal. Recommend dryer vent cleaning every 1-2 years. Thank you for your business!
Christian C.
Performed preventative maintenance on a Goodman furnace. Upon arrival I watched system cycle on with a call for heat. I took a combustion analysis test and got the following results: O2 is 6.5% and the CO is 12 ppm. I took amp readings on the inducer motor and blower motor, both are in good range. I checked all vinyl tubing for clogs or leaks. Checked all electrical components to ensure connections are good. Checked and cleaned flame sensor and burner compartment. Changed filter sized 16x25x4.Watched system cycle off when the temperature was reached. Set thermostat back to homeowner’s desired temperature. System is working properly at this time. Performed preventative maintenance on a York furnace. Upon arrival I watched system cycle on with the call for heat. I took a combustion analysis test and got the following: 7.3% O2 and 6ppm CO. I checked and cleaned burner compartment and flame sensor. Changed filter sized 16x24x4. Checked all electrical components to ensure connections are
Paul T.
Came out today to inspect leaking vents on the second floor. Upon arrival the homeowner showed me the vents that were leaking. This is a Lennox ac only system model #CBX32M-030-230-6-04, serial #5809A02216. I inspected the air handler located in the attic. Both the secondary pan and evaporator pans were bone dry. I inspected the condensate pump and it had very little water in it. Over the holiday weekend the temperature dipped down to 8° and this system sits in a attic. I believe that when the cold air from the attic met the hot air from the first floor system it caused the ducts to condensate. There is nothing that can be done at this point but let the ducts dry out. I recommend that the homeowner call chud for preventative maintenance on the ac system before he runs it in the spring. This will give us the opportunity to make sure everything is operating properly.
Frank B.
Customer call for no heat coming from the first floor system. This home has a system in the basement and one in the attic. Upon arrival I found no power coming from the furnace with the emergency switch out. The furnace still turned on. I then went over to the stairwell to see if there was a second emergency switch and found that the switch at the top of the stairwell was turned off turn the switch on and the heater ran without issue. Customer mentioned they were moving A large item in the home and must have hit it. System is operating properly at this time. Recommend having preventative maintenance done on both systems to make sure all is in good shape even if it’s running fine. System was last serviced by chud in 2018. Furnaces tend to get dirty over time and it could affect the system operation. Manufacturer Lennox Model #G61MPV-60C-091-12 Serial #5911F07574
Paul T.
Came out today for a no heat call on a Lennox furnace model #SL280UH110V60C-03 , serial #5912E26191. Upon arrival the second floor thermostat was receiving an error code for missing R wire on a nest thermostat. I explained to the homeowner that I have seen this issue before with the nest thermostat. I removed the thermostat from the sub base and plugged it into a cell phone charger to charge the thermostat. While it was charging I checked the voltage at the thermostat and it indeed is receiving 24 volts. I checked the terminals at the furnace and had 24 volts there as well. I installed the thermostat back on the sub base and called for heat. The system started without any issues. I explained to the homeowner that this is a common issue with the nest thermostat and is a defect in the thermostat not the furnace. If the issues continue I recommend installing a basic thermostat. While working on the system I noticed that the condensate pump was continuously running. I found the vinyl tubi
Shane A.
Showed up for maintenance. It was a oil furnace. Did not touch the system we do not work on oil heat. Customer wants a 4 bedroom duct cleaning.
Frank B.
Performed preventative maintenance for 2 side by side gas furnaces in the basement. One system heats the first floor and the other does the second floor. Replaced the customer supplied air filters (2- Merv 11 20x25x5 popup). Inspected all the electrical components. Confirmed proper high and low voltages. Cleaned the flame sensors, burners and burner compartments. Tested the amp draw for the blowers and inducers. Both, while working properly were on the high side of the range. The humidifier for the first floor system is not functioning and the piercing valve is broken. Recommend replacing this bypass humidifier. The humidifier for the second floor that we repaired is still working. It needs a new #12 water panel that I didn’t have available due to it being a very old humidifier. Performed a combustion analysis on both furnaces. First floor system is operating at 79.8% efficiency with a CO level of 37ppm. Second floor system is operating at 79.6% efficiency with a CO level of 41ppm. Bot
Frank B.
Performed preventative maintenance for 2 gas furnaces both in the basement. One system heat/cool first floor and the other does the second floor. Cleaned the burners, flame sensor and burner compartment. Customer replaced the 2- Merv 11 16x25x5 air filter. Inspected all the electrical components. Confirmed proper high and low voltages. Made sure all safety devices are working within the systems. Tested the amp draw for the inducers and blowers. All were operating within the manufacturer specifications. Performed a combustion analysis on both systems. Furnace #1 was operating at 81% efficiency with a CO level of 23ppm. Furnace #2 was operating at 80% efficiency with a CO level of 28ppm. Furnace #2 has some signs of moisture coming from flue. Mentioned to customer to have a chimney company check the piping. It’s not a brick chimney it’s B-vent piping to the roof. Both systems are operating properly at this time. Customer is already scheduled to have duct cleaning after home renovations.
Shane A.
Showed up to customers house saying her furnace was leaking water. After inspecting I noticed the water came from the humidifier and the drain port on the humidifier was completely broken off. I will be recommending a new humidifier and duct cleaning and maintenance on both units. M#SL280UH110V60C-03 s#SL280UH110V60C-03 Multiple systems
Keith R.
Performed air duct cleaning and sanitation on a 3 bedroom 2 system house. All vents and ductwork are clear of dust and debris at this time. Both systems are functioning properly at this time. Recommend duct cleaning every 3-4 years. Thank you for your business!
Paul T.
First floor system model #sl280UH070V36A-03, serial #5914k29531. I made sure the power to the system was off and removed the access panels. I unscrewed the board and moved it out of the way. I removed and replaced the module and blower motor. Upon completion of the repair I tested the system by calling for heat. I let the system run for about a half hour while I worked on the 2nd floor system. The system is operating properly. I powered the system back down and performed preventative maintenance. Replaced the air filter size 16x25x5 homeowner supplied. Checked all electrical connections to ensure that they are secure and in good condition. Checked the pressure switch for clogs. Removed and cleaned carbon off of the flame sensor and cleaned out the burners and burner box. I powered the system back up and called for heat. Took a combustion analysis test and received the following readings, o2 is 13% and the co levels are 16ppm. The blower motor amp draw is 5.6 and the inducer motor amp d
Frank B.
Performed preventative maintenance for standard gas furnace. Customer also called for system not working. Upon inspection I found the inducer port to be partially blocked causing intermittent operation. Cleared the debris and cleaned the system. Heater ran as it should after port was clear. Recommended the customer call a chimney company to inspect the flue going to the roof. Something is causing water to get into the house through the system which could eventually damage the inducer, gas valve and burner assembly. This is what caused the port to be clogged. Replaced customer supplied air filter (Merv 11 16x25x5) that was overdue. Filter was changed last year 7/2021. Filter should be replaced once every 6-12 months. Inspected all the electrical components. Confirmed proper high and low voltages. Cleaned the burners, flame sensor and burner compartment. System had a temperature rise of 48°. Performed a combustion analysis on the system. System is operating at 83.8% efficiency with a CO